Vermont Natural Coatings PolyRock Concrete Coating Dark Gray gal

Experience the culmination of academic inquiry, scientific innovation, and Vermont ingenuity with PolyRock Concrete Coating by Vermont Natural Coatings. Engineered to meet and exceed the highest performance safety standards in the building industry, our coatings set new benchmarks for safety, performance, and environmental responsibility across the US and Canada. In a landscape where toxins prevail, we offer a superior alternative. PolyRock represents our dedication to innovation for a changing world, prioritizing the future. With PolyRock, we deliver on our promise to provide coatings that are safe for people, pets, and the planet, ensuring a harmonious blend of durability and sustainability for your surfaces. SURFACE PREPARATION: Surface should be free of dust, dirt, contaminants, oil, grease or additives. Clean surfaces thoroughly with Vermont Natural Coatings Multi-Surface Cleaner before applying PolyRock Concrete Coating. Existing coatings that are well adhered may be removed or abraded to provide an anchor profile for proper adhesion. Clean to remove dust. Use Dynaseal Concrete & Masonry Sealer to prime untreated cements. APPLICATION: Stir or shake well prior to use. Always test finish on a discrete area to confirm desired appearance. For best results apply when relative humidity is between 40% to 60%. Do not apply if temperature is below 40?F/4.44?C. Apply with a brush, 3/8 nap microfiber roller, painters pad and or spray equipment. For exterior and interior use. Apply two thin coats. Allow the first coat to dry approximately 2 hours before applying the second coat. Under normal conditions treated concrete will be dry and ready for foot traffic in 2-3 hours. COVERAGE: One Gallon will cover approximately 300-350 sq. ft. depending on conditions.