Rust-Oleum 322761 Indus Floor Coating 1000sq ft Pro Series MOCHA

I used the Rock Solid Polycuramine 1000 sq ft industrial floor coating on a 570 sq. ft. Garage floor. After removing all contents from the garage and giving the floor a good cleaning with a pressure washer I used muriatic acid 2xs to make sure the floor was clean and etched. Hosing down with hose the first time then pressure washing after the last etching and using a squeeze the second time. Let thoroughly dry for 2 days using electric heaters to keep the temp at around 60-degree F. Also used the H&C anti slip compound at the rate of 3.2 Oz per burst pouch. Rusteloum support said after mixing the burst pouches to pour the Polycuramine into a buck then mix in the 3.2 Oz of anti-slip compound stirring this before each pour. Before using all 4 burst pouches on the 570 sq ft floor I contacted Rusteloum and ask if it was OK to use the 4 pouches on 570 sq ft. She's said yes but not to drive on it within the 24-hour recommended time since it would be a heavier coating, waited 4 days. I did use a medium coating of flakes witch did turn out ok. I am disappointed in the looks of the rock solid finished product. Have very little gloss at all mostly being a dull finish. I have contacted Rusteloum and told them about the outcome. I am to send pictures of the finished product. I called the number that is located on the burst pouches.